Lean management methods: Evidence from the manufacturing industry in the Czech Republic
-
DOIhttp://dx.doi.org/10.21511/ppm.22(3).2024.39
-
Article InfoVolume 22 2024, Issue #3, pp. 517-527
- 236 Views
-
57 Downloads
This work is licensed under a
Creative Commons Attribution 4.0 International License
Lean management is a way to satisfy the increasing customer demands while maintaining production efficiency. This paper aims to map and analyze the level of use of lean management methods in the manufacturing industry in the Czech Republic. It searched for links and dependencies between company size, production type, and lean management methods in operational processes. The data were obtained from a nationwide survey within the manufacturing industry companies and were presented using descriptive statistics. A structured questionnaire was sent to 469 manufacturing companies with a return rate of 18.8%. Nonparametric statistical analysis (Fisher’s exact test) was used to confirm or reject the hypotheses. The research results confirmed the dependence of lean management methods on company size and production type. Lean management methods are used mainly by large enterprises, while micro- and small enterprises rarely employ them. Considering production typology, lean management is applied in serial production, and Single Minute Exchange of Dies (SMED) prevails. The most used techniques in mass production include the method of order in the workplace (5S) and Kaizen. The findings suggest that the future of industrial output should focus on sustainability and rationalization of production resources, which is offered by the synergy of lean management and Industry 5.0.
Acknowledgment
This paper is co-financed by IGA/FLKR/2023/002 Rationalization and Sustainability of Resources in Production-Logistics Processes the Czech Republic and RVO/FLKŘ/2024/01 Logistic Systems Safety.
- Keywords
-
JEL Classification (Paper profile tab)M21, L23, L26
-
References42
-
Tables7
-
Figures0
-
- Table 1. Use of lean management methods by company size
- Table 2. Lean management methods for standardization and process management according to company size
- Table 3. Modified Fisher’s exact test: Dependence of company size and the use of lean management methods for standardization and process control
- Table 4. Use of lean management methods according to production processes
- Table 5. Modified Fisher’s exact test: Dependence of production processes and the use of lean management methods for standardization and management of processes and type of production
- Table 6. Lean management methods for standardization and process control according to the type of production processes
- Table 7. Impacts of lean management by company size
-
- Ahn, H., & Chang, T-W. (2019). A similarity-based hierarchical clustering method for manufacturing process models. Sustainability, 11(9), Article 2560.
- Amaral, V. P., Ferreira, A. C., & Ramos, B. (2022). Internal logistics process improvement using PDACA: A case study in the automotive sector. Business System Research Journal, 13(3), 100-115.
- Barabas, S., & Florescu, A. (2022). Development trends of production systems through the integration of lean management and Industry 4.0. Applied Sciences, 12(10), Article 4885.
- Bastas, A. (2021). Sustainable manufacturing technologies: A systematic review of latest trends and themes. Sustainability, 13(8), Article 4271.
- Batwara, A., Sharma, V., Makkar, M., & Giallanza, A. (2023). Towards smart sustainable development through value stream mapping – A systematic literature review. Heliyon, 9(5), Article e15852.
- Berhe, H. H. (2022). Application of Kaizen philosophy for enhancing manufacturing industries performance: Exploratory study of Ethiopian chemical industries. International Journal of Quality and Reliability Management, 39(1), 204-235.
- Bertagnolli, F., Hermann, K., Rittmann, I., & Viere, T. (2021). The application of lean methods in corporate sustainability – A systematic literature review. Sustainability, 13(22), Article 12786.
- Bhasin, S. (2012). Performance of lean in large organisations. Journal of Manufacturing Systems, 31(3), 349-357.
- Ciannella, S., & Santos, L. C. (2022). Exploring the influcence of lean manufacturing practices on employee social sustainability. Social Responsibility Journal, 18(8), 1677-1691.
- Cortes-Aguilar, T. A., Cantoral-Ceballos, J. A., & Tovar-Arriaga, A. (2022). Link quality estimation for wireless ANDON towers based on deep learning models. Sensors, 22(17), Article 6383.
- Dang-Pham, D., Hoang, A. P., Vo, D. T., & Kautz K. (2022). Digital Kaizen: An approach to digital transform. Australasian Journal of Information Systems, 26.
- Diogo, M., Fonseca, L., Avila, P., & Bastos, J. (2021). Lean practices adoption in the Portuguese industry. Journal of Industrial Engineering and Management, 14(2).
- Flug, J. A., Stellmaker, J. A., Tollefson, C. D., Comstock, E. M., Buelna, E., Truman, B., Ponce, L., Milosek, A., McCabe, J., & Jokerst, C. E. (2022). Improving turnaround time in a hospital-based CT division with the kaizen method. Radiographics, 42(4), E125-E131.
- Godoy, R. F., Munhoz, I. P., de Oliveira, G. G., Rosa, M. T. de M. G., de Gouvêa , M. T., & Akkari, A. C. S. (2023). Operacionalização da metodologia kaizen a fim de otimizar o desempenho organizacional: Um enfoque na gestão de processos em uma indústria eletrônica [Operationalization of the kaizen methodology to improve organizational performance: A focus on the process management in an electronic industry]. Revista de Gestao e Secretariado-Gesec, 14(2), 1832-1854. (In Portuguese).
- Habib, M. A., Rizvan, R., & Ahmed, S. (2023). Implementing lean manufacturing for improvement of operational performance in a labeling and packaging plant: A case study in Bangladesh. Results in Engineering, 17, Article 100818.
- Juárez-Vite, A., Corona-Armenta, J. R., Rivera-Gómez, H., Montano-Arango, O., & Medina-Marín, J. (2023). Application of the SMED methodology through folding references for a bus manufacturing company. International Journal of Industrial Engineering and Management, 14(3), 232-243.
- Jurík, L., Horňáková, N., & Domčeková, V. (2020). The application of SMED method in the industrial enterprise. Acta Logistica, 7(4), 269-281.
- Khoza, S., Chengedzai, M., & Okoumba W. V. L. (2022). Lean practices and supply-chain competitiveness in the steel industry in Gauteng, South Africa. South African Journal of Economic and Management Sciences, 25(1), Article a4617.
- Kihel, E. Y., Kihel, E. A., & Embarki, S. (2022). Optimization of the sustainable distribution supply chain using the lean value stream mapping 4.0 tool: A case study of the automotive wiring industry. Processes, 10(9), Article 1671.
- Ko, Ch. H., & Kuo, J. D. (2020). Improving formwork using lean tools. MATEC Web of Conferences 312, Article 02007.
- Kosasih, W., Pujawan, I. N., Karningsih, P. D., & Shee, H. (2023). Integrated lean-green practices and supply chain sustainability framework. Cleaner and Responsible Consumption, 11, Article 100143.
- Kumar, S. K. M., Akila, K., Arun, K., Prabhu, S., & Selvakumar, C. (2022). Implementation of 5S practices in a small scale manufacturing industries. Materials Today: Proceedings, 62, 1913-1916.
- Liutkeviciene, I., Rytter, N. G. M., & Hansen, D. (2022). Leveraging capabilities for digitally supported process improvement: A framework for combining lean and ERP. Business Process Management Journal, 28(3), 765-783.
- Manzanares-Canizares, C., Sanchez-Lite, A., Rosales-Prieto, V., Fuentes-Bargues, J. L., & Gonzales-Gaya, Ch. (2022). A 5S strategy for a sustainable welding process. Sustainability, 14(11), Article 6499.
- Martinelli, M., Lippi, M., & Gamberini, R. (2022). Poka Yoke meets deep learning: A proof of concept for an assembly line application. Applied Sciences, 12(21), Article 11071.
- Milosevic, M., Djapan, M., D’Amato, R., Ungureanu, N., & Ruggiero, A. (2021). Sustainability of the production process by applying lean manufacturing through the PDCA cycle – A case study in the machinery industry. In S. Hloch, D. Klichová, F. Pude, G. M. Krolczyk, & S. Chattopadhyaya (Eds.), Advances in Manufacturing Engineering and Materials II. ICMEM 2021. Lecture Notes in Mechanical Engineering. Cham: Springer.
- Minh, N. D., & Quyen, N. T. H. (2022). Human resources quality improvement from the perspective of kaizen practices. Management, 26(1), 144-163.
- Naeemah, A. J., & Wong, K. Y. (2023). Selection methods of lean management tools: A review. International Journal of Productivity and Performance Management, 72(4), 1077-1110.
- Nikolić, J., Dašić, M., & Djapan, M. (2023). SMED as an indispensable part of lean manufacturing in the small and medium enterprises. International Journal for Quality Research, 17(1), 255-270.
- Randhawa, J. S., & Ahuja, I. S. (2018). Empirical investigation of contributions of 5S practice for realizing improved competitive dimensions. International Journal of Quality & Reliability Management, 35(3), 779-810.
- Santos, E., Lima, T. M., & Gaspar, P. D. (2023). Optimization of the production management of an upholstery manufacturing process using lean tools: A case study. Applied Sciences, 13(17), Article 9974.
- Shahriar, M. M., Parvez, M. S., Islam, M. A., & Talapatra, S. (2022). Implementation of 5S in a plastic bag manufacturing industry: A case study. Cleaner Engineering and Technology, 8, Article 100488.
- Siegel, R., Antony, J., Govindan, K., Garza-Reyes, J. A., Lameijer, B., & Samadhiya, A. (2024). A framework for the systematic implementation of green-lean and sustainability in SMEs. Production Planning & Control, 35(1), 71-89.
- Suhardi, B., Putri, H., Maudiena, K. S., Jauhari, W. A., & Ramirez, F. J. (rev. ed.). (2020). Implementation of value stream mapping to reduce waste in a textile products industry. Cogent Engineering, 7(1).
- Sundararajan, N., & Terkar, R. (2022). Improving productivity in fastener manufacturing through the application of lean-kaizen principles. Materials Today-Proceedings, 62, 1169-1178.
- Suresh, M., Antony, J., Nair, G., & Garza-Reyes, J. A. (2023). Lean-sustainability assessment Framework development: Evidence from the construction industry. Total Quality Management & Business Excellence, 34(15-16), 2046-2081.
- Teixeira, P., Sá, J., Silva, F., Ferreira, L., Santos, G., & Fontoura, P. (2021). Connecting lean and green with sustainability towards a conceptual model. Journal of Cleaner Production, 322, Article 129047.
- Van Assen, M. F. (2021). Lean, process improvement and customer-focused performance. The moderating effect of perceived organisational context. Total Quality Management & Business Excellence, 32(1-2), 57-75.
- Van Landeghem, H. (2014). A management system for sustainable lean implementation. In V. Modrák & P. Semančo (Eds.), Handbook of Research on Design and Management of Lean Production Systems (pp. 173-187). IGI Global.
- Vera, A., & Zapata, C. M. (2022). Best practices of business process improvement: Towards a representation on top of the Quintessence kernel. Business Process Management Journal, 28(3), 876-903.
- Wani, Z. K., Chin, J. F., & Muhammad, N. A. (2019). Common mistakes in running PDCA: A survey on university student PDCA projects. IOP Conference Series: Materials Science and Engineering, 530.
- Wijaya, S., Hariyadi, S., Debora, A. F., & Supriadi, G. (2020). Design and implementation of Poka-Yoke system in stationary spot-welding production line utilizing internet-of-things platform. Journal of ICT Research and Applications, 14(1), 34-50.