Additive economy and new horizons of innovative business development
-
DOIhttp://dx.doi.org/10.21511/ppm.20(2).2022.15
-
Article InfoVolume 20 2022, Issue #2, pp. 175-185
- Cited by
- 892 Views
-
351 Downloads
This work is licensed under a
Creative Commons Attribution 4.0 International License
The disruptive technologies and cyber-physical production systems are important factors that bring transformations to socio-economic formations. The paper aims to formulate the content, key directions, positive and negative effects of additive economy (AE) in the current transition phase to Industry 4.0. The research method is based on the analysis of structural links in socio-economic systems, where the additive economy potential is realized. The additive economy is treated as a new approach to production technological aspect based on the additive principle of manufacturing and aimed at minimizing the use of primary natural resources for dematerialization of social production. AE is the antithesis of the subtractive economy, which dominates today and uses only a tiny proportion of extracted natural resources. Among the positive effects of AE, there are the reduction in energy intensity of products, dematerialization of production, solidarity of society, economic systems sustainability, and intellectualization of technologies and materials. Among the negative expectations of AE, there are increased information vulnerability of production, risk of losing control over cyber-physical systems, expanding the unification of individuals, and increasing psychological stress. The additive economy is more sustainable than the subtractive economy since it does not require extra components to the production spheres, reduces the resource scarcity, and could satisfy more economic agents’ needs. Therefore, improved production efficiency due to AE promises economic growth acceleration, environmental burden and social risk reduction.
Acknowledgment
The publication was prepared in the framework of the research projects “Sustainable development and resource security: from disruptive technologies to digital transformation of Ukrainian economy” (№ 0121U100470); Fundamental bases of the phase transition to an additive economy: from disruptive technologies to institutional sociologization of decisions (No. 0121U109557).
- Keywords
-
JEL Classification (Paper profile tab)M11, O14, O30, O40
-
References32
-
Tables2
-
Figures2
-
- Figure 1. Components of transformations of phase transition to the additive economy
- Figure 2. Some types of modern information products
-
- Table 1. Projected effects of additive economy development until 2025
- Table 2. “Horizons” (expected socio-economic effects) of the additive economy
-
- Additive Manufacturing (AM). (2016). AM Basics.
- Barnatt, Ch. (2016). 3D Printing (3rd ed.).
- Bauwens, T., Hekkert, M., & Kirchherr, J. (2020). Circular futures: What will they look like? Ecological Economics, 175, 106703.
- Benetyte, R., Rubio, J. G., Kovalov, B., Matviychuk-Soskina, N., & Krusinskas, R. (2021). Role of R&D expenditure, CEO compensation and financial ratios for country’s economic sustainability and innovative growth. International Journal of Global Energy Issues, 43(2-3), 228-246.
- Berman, B. (2012). 3-D printing: The new industrial revolution. Business Horizons, 55(2), 155-162.
- IDEA Consult. (2021). EU Market for 3DP Demonstration Equipment and Services (Final Report).
- Karintseva, O., Kharchenko, M., Boon, E.K., Derykolenko, O., Melnyk, V., & Kobzar, O. (2021). Environmental determinants of energy-efficient transformation of national economies for sustainable development. International Journal of Global Energy Issues, 43(2-3), 262-274.
- Klymchuk, O., Khodakivska, O., Kovalov, B., Brusina, A., Benetyte, R., & Momotenko, I. (2020). World trends in bioethanol and biodiesel production in the context of sustainable energy development. International Journal of Global Environmental Issues, 19(1-3), 90-108.
- Koblianska, I., & Kalachevska, L. (2019). Problems of the institutional-legal and organizational provision of systemic innovation policy: The case of Ukraine. Comparative Economic Research, 22(1), 53-73.
- Kranz, G., Jones, M., & Posey, B. (2021). Technological convergence. TechTarget.
- Kurbatova, T., & Sidortsov, R. (2022). Trash to Hryvnias: The economics of electricity generation from landfill gas in Ukraine. International Journal of Sustainable Energy Planning and Management, 33, 53-64.
- Maddikunta, P. K. R., Pham, Q.-V., Prabadevi, B., Deepa, N., Dev, K., Gadekallu, T. R., Ruby, R., & Liyanage, M. (2022). Industry 5.0: A survey on enabling technologies and potential applications. Journal of Industrial Information Integration, 26, 100257.
- Manyika, J., Chui, M., Bughin, J., Dobbs, R., Bisson, P., & Marrs, A. (2013). Disruptive technologies: Advances that will transform life, business, and the global economy. McKinsey Global Institute.
- Melnyk, L. G., Shkarupa, E. V., & Kharchenko, M. O. (2013). Innovative strategies to increase economic efficiency of greening the economy. Middle East Journal of Scientific Research, 16(1), 30-37.
- Melnyk, L. G. (2014). Trialectics of systems formation and development. Aktualni problemy ekonomiky – Actual Problems of Economics, 10, 34-39.
- Mohajeri, B., Poesche, J., Kauranen, I., & Nyberg, T. (2016). Shift to social manufacturing: Applications of additive manufacturing for consumer products. Proceedings 2016 IEEE International Conference on Service Operations and Logistics, and Informatics (SOLI) (pp. 1-6).
- Quanjin, M., Rejab, M. R. M., Idris, M. S., Kumar, N. M., Abdullah, M. H., & Reddy, G. R. (2020). Recent 3D and 4D intelligent printing technologies: A comparative review and future perspective. Procedia Computer Science, 167, 1210-1219.
- Reddy, S. (2022). Smart materials for 4D printing: A review on developments, challenges and applications. In S. K. Natarajan, R. Prakash, & K. Sankaranarayanasamy (Eds.), Recent Advances in Manufacturing, Automation, Design and Energy Technologies (pp. 3-10). Singapore: Springer.
- Rifkin, J. (2013). The Third Industrial Revolution: How Lateral Power is Transforming Energy. St. Martin’s Griffin Publisher.
- Schwab, K. (2017). The Fourth Industrial Revolution. World Economic Forum.
- Schwab, K., & Davis, N. (2018). Shaping the Fourth Industrial Revolution. World Economic Forum.
- Sculpteo. (2021). The State of 3D Printing in 2021 (Report).
- Shahan, Z. (2020). Renewable Energy = 22.2% Of US Electricity in 1st Half Of 2020 (Charts). CleanTechnica.
- Sineviciene, L., Hens, L., Kubatko, O., Melnyk, L., Dehtyarova, I., & Fedyna, S. (2021). Socio-economic and cultural effects of disruptive industrial technologies for sustainable development. International Journal of Global Energy Issues, 43(2-3), 284-305.
- Skinner, C. (2018). Digital Human: The Fourth Revolution of Humanity Includes Everyone. Wiley.
- Sotnyk, I. (2012). Tendentsii i problemy upravlinnia demateryalizatsiieiu vyrobnytstva y spozhyvannia [Trends and problems of management of production and consumption dematerialization]. Aktualni problemy ekonomiky – Actual Problems of Economics, 8, 62-67. (In Ukrainian).
- Sotnyk, I. M., Volk, O. M., & Chortok, Y. (2013). Pidvyshchennia ekoloho-ekonomichnoi efektyvnosti vprovadzhennia informatsiino-komunikatsiinykh tekhnolohii yak innovatsiinoho napriamu resursozberezhennia [Increasing eco-economic efficiency of ICT as a resource saving innovative direction]. Aktualni problemy ekonomiky – Actual Problems of Economics, 9, 229-235. (In Ukrainian).
- SPI Lasers. (2017). Additive Manufacturing Definition: What is Additive Manufacturing?
- Taleb, N. N. (2012). Antifragile: Things that gain from disorder (544p.). Random House.
- Trypolska, G., Kurbatova, T., Prokopenko, O., Howaniec, H., & Klapkiv, Yu. (2022). Wind and Solar Power Plant End-of-Life Equipment: Prospects for Management in Ukraine. Energies, 15(5), 1662.
- Veklych, O., Karintseva, O., Yevdokymov, A., & Guillamon-Saorin, E. (2020). Compensation mechanism for damage from ecosystem services deterioration: Constitutive characteristic. International Journal of Global Environmental Issues, 19(1-3), 129-142.
- Yeh, C. (2014). Trend analysis for the market and application development of 3D printing. International Journal of Automation and Smart Technology, 4(1), 1-3.