Impact of trade liberalization on technical efficiency of mining sector: A case of selected SADC countries
-
DOIhttp://dx.doi.org/10.21511/ppm.19(4).2021.29
-
Article InfoVolume 19 2021, Issue #4, pp. 362-374
- Cited by
- 488 Views
-
124 Downloads
This work is licensed under a
Creative Commons Attribution 4.0 International License
Productive inefficiency and lagging technology progress are major reasons behind the Southern Africa Development Community’s (SADC) continued exportation of unprocessed minerals to the world markets. The study seeks to uncover the impact of trade openness on the technical efficiency of the mining sector in selected SADC countries (Botswana, DRC, Namibia, South Africa, Zambia, and Zimbabwe). Technical efficiency is the ability of any production process to produce maximum output from minimum quantities of inputs. A Cobb Douglas Stochastic Frontier Approach in a single-stage maximum likelihood estimation of Green’s true fixed effects was used to compute technical efficiency (scores) and the technological progress in the mining sector of SADC. Results indicate that there is no technical efficiency gains from trade liberalization during the period under study together with positive and significant technological progress. A coefficient of 0.72 suggests that a 1% increase in trade openness increases technical inefficiency in the mining sector by 0.72%. The parameter coefficient from the truncated normal distribution of the true fixed effects model indicated that technological progress from one year to the next year would lead to a 2.6% increase in the output index of the mining. Technological progress in the mining sector should target upstream mineral value chains instead of only upgrading technology in one dimension of extraction. In addition, countries should collectively and gradually put across laws that force new investments in the extraction of minerals to erect processing plants in mining value addition of host countries to re-direct economies into a growth path.
Acknowledgments
The authors are grateful to the North West University (RSA) for financing this study.
- Keywords
-
JEL Classification (Paper profile tab)L72, Q37, F18
-
References63
-
Tables6
-
Figures0
-
- Table 1. Stationarity results of the LLC and IPS tests for key variables of the technical efficiency model
- Table 2. Hypothesis testing to ascertain technical inefficiency in the model
- Table 3. Critical values
- Table 4. Log-likelihood ratio test – selecting SFA versus OLS model
- Table 5. Cobb-Douglas Stochastic Frontier true fixed effects – maximum likelihood estimates
- Table 6. Determinants of technical inefficiency
-
- Abegaz, M. T. (2013). Total factor productivity and technical efficiency in the Ethiopian manufacturing sector (Working Paper No. 010). Ethiopian Development Research Institute.
- African Union. (2009). Africa Mining Vision.
- Aigner, D., Lovell, C. A. K., & Schmidt, P. (1977). Formulation and estimation of stochastic frontier production function models. Journal of Econometrics, 6(1), 21-37.
- Ali, K., & Hamid, A. (1996). Technical change, technical efficiency, and their impact on input demand in the agricultural and manufacturing sectors of Pakistan. The Pakistan Development Review, 35(3), 215-228.
- Amos, T. T. (2007). An Analysis of Productivity and Technical Efficiency of Smallholder Cocoa Farmers in Nigeria. Journal of Social Sciences, 15(2), 127-133.
- Balakrishnan, P., & Pushpangadan, K. (1994). Total Factor-Productivity Growth in Manufacturing Industry: A Fresh Look. Economic and Political Weekly, 29(31), 2028-2035.
- Battese, G. E., & Coelli, T. J. (1988). Prediction of firm-level technical efficiencies with a generalized frontier production function and panel data. Journal of Econometrics, 38(3), 387-399.
- Battese, G. E., & Coelli, T. J. (1992). Frontier production functions, technical efficiency and panel data: With application to paddy farmers in India. Journal of Productivity Analysis, 3(1-2), 153-169.
- Battese, G. E., & Coelli, T. J. (1995). A model for technical inefficiency effects in a stochastic frontier production function for panel data. Empirical Economics, 20(2), 325-332.
- Chu, S., & Kalirajan, K. (2010). Impact of Trade Liberalization on Technical Efficiency of Vietnamese Manufacturing Firms. Conference on “Frontier Issues in Technology, Development and Environment”. Madras School of Economics.
- Cornwell, C., Schmidt, P., & Sickles, R. C. (1990). Production frontiers with cross-sectional and time-series variation in efficiency levels. Journal of Econometrics, 46(1-2), 185-200.
- Davis, A. G. (2010). Trade in mineral resources (Staff Working Paper ERSD-2010-01). World Trade Organization.
- Díaz-Mayans, M. Á., & Sánchez-Pérez, R. (2014). Innovation, exports and technical efficiency in Spain (MPRA Paper No. 53230).
- Djokoto, J. G. (2013). Trade Openness and Technical Efficiency Change in Ghana’s Agriculture. Journal of Empirical Economics, 1(1), 1-10.
- Elmslie, B., & Vieira, F. (2002). A primer on technology gap theory and empirics. In Foundations of International Economics (pp. 258-282). Routledge.
- Farrell, J. M. (1957). The Measurement of Productive Efficiency. Journal of the Royal Statistical, 120(3), 253-290.
- Fayissa, B., & Nsiah, C. (2013). The impact of governance on economic growth in Africa. Journal of Developing Areas, 47(1), 91-108.
- Gouma, R., Chen, W., Woltjer, P., & Timmer, M. (2018). WIOD Socio-Economic Accounts 2016: Sources and Methods. World Input-Output Database Project.
- Greene, W. (2005). Fixed and Random Effects in Stochastic Frontier Models. Journal of Productivity Analysis, 23(1), 7-32.
- Grossman, G. M., & Helpman, E. (1991). Quality Ladders in Theory of growth. The Review of Economics Studies, 58(1), 43-61.
- Hossain, M. K., Kamil A. A., Baten, M. A., & Mustafa, A. (2012). Stochastic Frontier Approach and Data Envelopment Analysis to Total Factor Productivity and Efficiency Measurement of Bangladeshi Rice. PLoS ONE, 7(10), e46081.
- Iddrisu, A., Adam, B., & Halidu, B. O. (2015). The Influence of Foreign Direct Investment (FDI) on the Productivity of the Industrial Sector in Ghana. International Journal of Academic Research in Accounting, Finance and Management Sciences, 5(3), 1-13.
- Iyer, K. G., Rambaldi, A. N., & Tang, K. K. (2008). Efficiency externalities of trade and alternative forms of foreign investment in OECD countries. Journal of Applied Econometrics, 23(6), 749-766.
- Jajri, I., & Ismail, R. (2006). Technical efficiency, technological change and total factor productivity growth in Malaysian manufacturing sector (MPRA Paper).
- Jondrow, J., Knox Lovell, C. A., Materov, I. S., & Schmidt, P. (1982). On the estimation of technical inefficiency in the stochastic frontier production function model. Journal of Econometrics, 19(2-3), 233-238.
- Kelle, W. (2002). Trade and the transmission of technology. Journal of Economic Growth, 7, 5-24.
- Kodde, D. A., & Palm, F. (1986). Wald Criteria for Jointly Testing Equality and Inequality Restrictions. Econometrica, 54(5), 1243-1248.
- Kumbhakar, C. S., & Knox Lovell, C. A. (2000). Stochastic Frontier Analysis. United Kingdom: Cambridge University Press.
- Kumbhakar, S. C. (1990). Production frontiers, panel data, and time-varying technical inefficiency. Journal of Econometrics, 46(1-2), 201-211.
- Kumbhakar, S. C., & Wang, H. J. (2005). Estimation of growth convergence using a stochastic production frontier approach. Economics Letters, 88(3), 300-305.
- Kumbhakar, S. C., Wang, H.-J., & Horncastle, A. P. (2015). A Practitioner’s Guide to Stochastic Frontier Analysis Using Stata. Cambridge University Press.
- Lucas, R. Jr. (1988). On the mechanism of economic development. Journal of Monetary Economics, 22(1), 3-42.
- Mandal, S. K., & Madheswaran, S. (2012). Productivity growth in Indian cement industry: A panel estimation of stochastic production frontier. The Journal of Developing Areas, 46(1), 287-303.
- Mankiw, N. G., Phelps, E. S., & Romer, P. M. (1995). The growth of nations. Brookings papers on economic activity, 1995(1), 275-326.
- Mankiw, G. N., Romer, D., & Weil, D. N. (1992). A Contribution to the Empirics of Economic Growth. The Quarterly Journal of Economics, 107(2), 407-437.
- Miljkovic, D., & Shaik, S. (2010). The Impact of Trade Openness on Technical Efficiency in U.S. Agriculture (Agribusiness & Applied Economics Report No. 660). North Dakota State University.
- Miljkovic, D., Miranda, S. H., & Shaik, S. (2013). Trade openness and technical efficiency in Brazilian agriculture. Applied Economics Letters, 20(2), 103-106.
- Oczkowski, E., & Sharma, K. (2005). Determinants of efficiency in least developed countries: further evidence from Nepalese manufacturing firms. Journal of Development Studies, 41(4), 617-630.
- Parameswaran, M. (2002). Economic reforms and technical efficiency: firm level evidence from selected industries in India (Working Paper No. 339).
- Phuong, V. H. (2018). Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry – Nonparametric Approach. E3S Web of Conferences, 35, 01009.
- Prescott, C. E. (1997). Needed: A theory of Total Factor Productivity (Research Department Staff Report No. 242). Federal Reserve Bank of Minneapolis.
- Rafayet, M. A., Erick, K., & Bizuayehu, B. (2017). Government Effectiveness and Economic Growth. Economics Bulletin, 37(1), 222-227.
- Rebelo, S. (1991). Long-Run Policy Analysis and Long-Run Growth. The Journal of Political Economy, 99(3), 500-521.
- Rodrik, D. (1992). The limits of trade policy reform in developing countries. Journal of Economic Perspectives, 6(1), 87-105.
- Rodríguez, F., & Rodrik, D. (2000). Trade Policy and Economic Growth: A Skeptic’s Guide to the Cross-National Evidence (NBER Working Paper No. 7081). Cambridge, MA.
- Romer, P. M. (1994). The origins of Endogenous Growth. Journal of Economic Perspectives, 8(1), 3-22.
- Rostow, W. W., & Rostow, W. W. (1990). The stages of economic growth: A non-communist manifesto. Cambridge university press.
- Saggi, K. (2002). Trade, Foreign Direct Investment, and International Technology Transfer: A Survey. The World Bank Research Observer, 17(2), 191-235.
- Sahoo, A. K., Sahoo, D., & Sahu, N. C. (2017). Productive performance of Indian Mining Industry: stochastic frontier decomposition. Global Journal of business, Economics and Management, 7(1), 80-88.
- Sato, R., & Mitchell, T. (1989). The economics of technical progress. Eastern Economic Journal, 15(4), 309-336.
- Schmidt, P., & Sickles, R. C. (1984). Production frontier and panel data. Journal of Business and Economics Statistics, 2(4), 367-374.
- Schmidt, P., & Wang, H. (2002). One-step and two-step estimation of the effects of exogenous variables on technical efficiency levels. Journal of Productivity Analysis, 18, 129-144.
- Southern African Development community (SADC). (2011). SADC statistics yearbook 2011.
- Solow, R. M. (1956). A contribution to the theory of economic growth. The quarterly journal of economics, 70(1), 65-94.
- Stiroh, K. J. (2001). What Drives Productivity Growth? Economic Policy Review, 7(1), 37-59.
- Sunge, R., & Ngepah, N. (2020). Agricultural trade liberalization, regional trade agreements and agricultural technical efficiency in Africa. Outlook on Agriculture, 49(1), 66-76.
- Syed, A., Grafton, R. Q., Kalirajan, K., & Parham, D. (2015). Multifactor productivity growth and the Australian mining sector. Australian Journal of Agricultural and Resource Economics, 59(4), 549-570.
- Tondl, G., & Fornero, J. A. (2008). Sectoral productivity and spillover effects of FDI in Latin America (FIW Working Paper No. 53).
- Tybout, J. R. (1992). Linking trade and productivity: New research directions. The World Bank Economic Review, 6(2), 189-211.
- United Nations Economic Commission for Africa. (2012a). Unleashing Africa’s potential as a Pole of Global growth (Economic Report on Africa 2012).
- United Nations Economic Commission for Africa. (2012b). African Development Forum (ADF-VIII).
- World Bank. (2014). Diagnostic Trade Integration Study. Washingtion, DC: World Bank.
- Zhuang, J., de Dios, E., & Lagman-Martin, A. (2010). Governance and Institutional Quality and the Links with Economic Growth and Income Inequality: With Special Reference to Developing Asia (ADB Economics Working Paper Series No. 193).